We only use virgin materials to manufacture our valves in DAVINCI LTD. All materials and components are inspected before processing. The raw materials are extensively tested on melt flow rate,oxidation induction time and moisture content prior to be released for further processing. #ValvesProduction #Davincivalves #Productvalves #Valvescycle2
We develop the technical drawings of all the parts of the valve to reach its best design.
You can dowload our technical data sheet on the PRODUCTS section or ask for more detailed information through CONTACT Section of our website. #ValvesProduction #Davincivalves #Productvalves #Valvescycle
The main parts of the most usual type of valve are the body and the bonnet. These two parts form the casing that holds the fluid going through the valve. Body
The valve's body is the outer casing of most or all of the valve that contains the internal parts or trim. The bonnet is the part of the encasing through which the stem (see below) passes and that forms a guide and seal for the stem. The bonnet typically screws into or is bolted to the valve body. Valve bodies are usua
Valves are found in virtually every industrial process, including water and sewage processing, mining, power generation, processing of oil, gas and petroleum, food manufacturing, chemical and plastic manufacturing and many other fields. People in developed nations use valves in their daily lives, including plumbing valves, such as taps for tap water, gas control valves on cookers, small valves fitted to washing machines and dishwashers, safety devices fitted to hot water syst