GENERAL CHARACTERISTICS:

Material construction in Ductile Iron GJS450
Disc Dúctil iron GJS450 Vulcanize
Max work pressure 175PSI /Temperature Max 120º
Construction design API609 Grooves standards ANSI/AWWA C606
Epoxy paint FBE Min 250 Mic
Certificate UL / FM . Testing according FM11112/ UL1091

Ref. 141A/48 Butterfly Valve Center Stem Plug Groove Type UL/FM FS 175PSI

SKU: 141A-48

Range from ND50 up to ND300.

Double Seal Disc Resilient EPDM Coated

Factory Installed Supervisory Tamper Switch Assembly

Low torque values.

Epoxy paint 250 microns
(a) Any descriptive information or samples supplied by DAVINCI VALVES LTD, or on its behalf, are for general guidance only and do not form part of any contract between DAVINCI VALVES LTD and the customer and the customer admits that it was not induced to enter into the contract by any representation contained in such information or sample. (b) DAVINCI VALVES LTD may at the request of the customer without being under any obligation to do so, furnish technical advice concerning the use of the products and such assistance will be given to the best of DAVINCI VALVE’s ability but this shall be on the express understanding that any such advice or assistance is given and accepted at the customer’s risk and DAVINCI VALVES shall not be liable for any loss, damage or claims arising there-from. (c) No liability will be accepted for work carried out or material supplied to the customer’s own drawings, design or speci

Ref. 141A/48 Butterfly Valve Center Stem Plug Groove Type UL/FM FS 175PSI

Product Info

Application

Norms and Standard Quality

Technical Advice