Ref. 123B-VI / PN 10-16 RESILIENT SEAT GATE VALVE THREADED ENDS

GENERAL CHARACTERISTICS

DAVINCI RESILIENT SEAT GATE VALVE – THREADED ENDS, engineered to provide reliable shut-off performance and certified safety in potable water and general pipeline systems. Designed for working pressures PN10/16, this valve ensures durability, tight sealing, and efficient operation in compact threaded installations.

Featuring a full bore design, it guarantees 100% tightness in both directions, delivering optimal flow capacity and secure isolation. The valve can be repacked under pipeline pressure, minimizing downtime and simplifying maintenance procedures. Its construction ensures low torque values, allowing smooth and effortless operation.

Protected with WRAS-approved epoxy coating (250 microns) and certified for WRAS (rubber and coating), it is fully suitable for drinking water applications. The valve is also CE certified, confirming compliance with applicable European regulations.

Manufactured according to recognized standards:

Design according to DIN 3352

Face-to-face dimensions according to GB/T 12221-2015

Threaded ends GS/NPT

A compact, standards-compliant, and maintenance-friendly resilient seat gate valve manufactured to deliver dependable performance and certified reliability in drinking water and industrial piping systems.

Ref. 123B-VI / PN 10-16 RESILIENT SEAT GATE VALVE THREADED ENDS

SKU: Ref. 123B-VI / PN 10-16

Sizes DN20 to DN50.
Working pressure PN10/16.
WRAS certificate (rubber and paint) for
drinking water
100% tightness in both ways. Full bore.
Repackable under pipeline pressure.
Complies with EN 1074-2 specifications.
Low torque values.
WRAS epoxy paint 250 microns.
(a) Any descriptive information or samples supplied by DAVINCI VALVES LTD, or on its behalf, are for general guidance only and do not form part of any contract between DAVINCI VALVES LTD and the customer and the customer admits that it was not induced to enter into the contract by any representation contained in such information or sample. (b) DAVINCI VALVES LTD may at the request of the customer without being under any obligation to do so, furnish technical advice concerning the use of the products and such assistance will be given to the best of DAVINCI VALVE’s ability but this shall be on the express understanding that any such advice or assistance is given and accepted at the customer’s risk and DAVINCI VALVES shall not be liable for any loss, damage or claims arising there-from. (c) No liability will be accepted for work carried out or material supplied to the customer’s own drawings, design or specifications. (d) The submission of a quotation or acceptance of any order by DAVINCI VALVES in no way implies any responsibility on its part for any by-law, planning or other approval which may be required by the customer.

Ref. 123B-VI / PN 10-16 RESILIENT SEAT GATE VALVE THREADED ENDS

Product Info

Application

Norms and Standard Quality

Technical Advice

Technical Data Sheet

DAVINCI VALVES

VALVES FITTINGS ACCESORIES