Ref. 200D/09 Resilient Seat Gate Valve BS5163

Range from ND40 up to ND1200.

Complies according the norm EN 1074-2

Full bore. 100% Tightness in both ways.

Minimum head loss.

Repackable under pipeline pressure.

Low torque values.

Epoxy paint 250 microns: RAL 5015.
Design: BS5163.

Manufacture according to: EN 1074-2./GB/T12232-1989

Face to Face: ANSI B16.10 EN-558-1 SERIE 3

Mounting between flanges: ANSI150 EN 1092-2, ISO 7005-2.

Pressure Test: EN 12266-1 Rate A. GB/T13927-1992

EU directive 2014/68/EU: Products excluded, article 1, § 2b up to ND300. Risk Category I MoD. A from ND350 to ND600

EPDM according to UNE -EN 681-1:1996

PTFE according to UNE-EN 13000-1:2006
(a) Any descriptive information or samples supplied by DAVINCI VALVES LTD, or on its behalf, are for general guidance only and do not form part of any contract between DAVINCI VALVES LTD and the customer and the customer admits that it was not induced to enter into the contract by any representation contained in such information or sample. (b) DAVINCI VALVES LTD may at the request of the customer without being under any obligation to do so, furnish technical advice concerning the use of the products and such assistance will be given to the best of DAVINCI VALVE’s ability but this shall be on the express understanding that any such advice or assistance is given and accepted at the customer’s risk and DAVINCI VALVES shall not be liable for any loss, damage or claims arising there-from. (c) No liability will be accepted for work carried out or material supplied to the customer’s own drawings, design or specifications. (d) The submission of a quotation or acceptance of any order by DAVINCI VALVES in no way implies any responsibility on its part for any by-law, planning or other approval which may be required by the customer.

Ref. 200D/09 Resilient Seat Gate Valve BS5163

Product Info

Application

Norms and Standard Quality

Working conditions

Technical Advice

Technical Data Sheet