GENERAL CHARACTERISTICS:
Material construction in SS316
Obturator SS316
Working pressure 1000WOG
Thread end GAS/NPT
Ref. 431/114 2-PC SPRING DISC CHECK VALVE
Full Bore
Low cost installation
Closure metal/metal
Sewage water
Size Range: DN80-800mm
End Connections: PN10, PN16.
Comply with EN 558-1, ISO 5752
and EN 1092-2, ISO 7005-2 flange dimension.
WORKING CONDITIONS:
Pressure Ratings: 1.0Mpa; 1.6Mpa; 2.5Mpa.
Working Temperature: -10C-80C
Flow Media: Clean Water
(a) Any descriptive information or samples supplied by DAVINCI VALVES LTD, or on its behalf, are for general guidance only and do not form part of any contract between DAVINCI VALVES LTD and the customer and the customer admits that it was not induced to enter into the contract by any representation contained in such information or sample. (b) DAVINCI VALVES LTD may at the request of the customer without being under any obligation to do so, furnish technical advice concerning the use of the products and such assistance will be given to the best of DAVINCI VALVE’s ability but this shall be on the express understanding that any such advice or assistance is given and accepted at the customer’s risk and DAVINCI VALVES shall not be liable for any loss, damage or claims arising there-from. (c) No liability will be accepted for work carried out or material supplied to the customer’s own drawings, design or specifications. (d) The submission of a quotation or acceptance of any order by DAVINCI VALVES in no way implies any responsibility on its part for any by-law, planning or other approval which may be required by the customer.
PDF file