GENERAL CHARACTERISTICS:

Material construction in Ductile Iron GJS500.
Vulcanize wedge EPDM con Wras
Epoxy paint FBE Min 250 Mic con Wras
Working pressure 1.0Mpa 1.6Mpa
Threaded ends DIN 259 ( GAS/NPT )

Ref. 210A/13 RESILIENT SEAT GATE VALVE NP16 THREADED END

SKU: 200A-13

Range from ND20 up to ND50.

WRAS certificate for Drinking Water (Rubber and paint)

Complies according the norm EN 1074-2

Full bore.

100% Tightness in both ways.

Minimum head loss.

Repackable under pipeline pressure.

Low torque values.

Epoxy paint 250 microns: RAL 5015.
(a) Any descriptive information or samples supplied by DAVINCI VALVES LTD, or on its behalf, are for general guidance only and do not form part of any contract between DAVINCI VALVES LTD and the customer and the customer admits that it was not induced to enter into the contract by any representation contained in such information or sample. (b) DAVINCI VALVES LTD may at the request of the customer without being under any obligation to do so, furnish technical advice concerning the use of the products and such assistance will be given to the best of DAVINCI VALVE’s ability but this shall be on the express understanding that any such advice or assistance is given and accepted at the customer’s risk and DAVINCI VALVES shall not be liable for any loss, damage or claims arising there-from. (c) No liability will be accepted for work carried out or material supplied to the customer’s own drawings, design or specifications. (d) The submission of a quotation or acceptance of any order by DAVINCI VALVES in no way implies any responsibility on its part for any by-law, planning or other approval which may be required by the customer.

Ref. 210A/13 RESILIENT SEAT GATE VALVE NP16 THREADED END

Product Info

Application

Norms and Standard Quality

Technical Advice

Technical Data Sheet